CYAT81658-64AS48
Manufacturer Part Number: CYAT81658-64AS48 | Manufacturer / Brand: Infineon Technologies |
Part of Description: SoC FPGA CYAT81658-64AS48 | Lead Free Status / RoHS Status: Lead free / RoHS Compliant |
Ship From: HK/Shen Zhen | Shipment Way: DHL/Fedex/TNT/UPS |
Datasheets: |
Product parameters
Manufacturer | Infineon |
RoHS | Details |
Product Category | Touch Screen Controllers |
Interface Type | I2C, SPI |
Package / Case | TQFP-64 |
Mounting Style | SMD/SMT |
Series | CYAT8165x |
Packaging | Tray |
Brand | Infineon Technologies |
Maximum Operating Temperature | -40C |
Minimum Operating Temperature | +105 C |
Memory Size | 128 Mbit |
Factory Pack Quantity | 1600 |
Moisture Sensitive | Yes |
Supply Voltage – Max | 5.5 V |
Supply Voltage – Min | 1.71 V |
Subcategory | Data Converter ICs |
Get in touch with us now
What is CYAT81658-64AS48?
This device contains a high-performance Arm 32-bit CPU with an integrated hardware multiply unit. This CPU controls all sensing and processing of measured capacitance results to allow tracking and
reporting touches. The controller is optimized for low power and fast response time, with built-in support for manufacturing test. The touchscreen controller communicates with a host through an I2C slave
interface at up to 400 kbps or an SPI interface at up to 8 Mbps.
Collects the touchscreen sensor information using the touch subsystem.
This touch subsystem consists of a 5-V TX pump, TX drivers, RX channels, and a programmable transmit/receive (TX/RX) multiplexer.
The multiplexer electrically connects the analog front end of each RX channel and TX driver to the appropriate row and column electrodes of the touchscreen sensor.
The controller TX/RX multiplexer allows flexibility of chip placement on the FPC. All pins connecting to the touchscreen sensor are programmable as either TX or RX.
CYAT81658-64AS48 Applications:
32-bit Arm® Cortex® CPU Register-configurable Noise-suppression technologies for display and EMI
Effective 20-V drive for higher signal-to-noise ratio (SNR) AutoArmor improves both electromagnetic emissions and immunity
External display synchronization Water rejection and wet-finger tracking using DualSense Multitouch glove with automatic mode switching
Ten fingers with thin glove ( 1-mm thick) Two fingers with thick glove ( 5-mm thick) Large object rejection
Automatic baseline tracking to environmental changes Low-power look-for-touch mode
Manufacturing Test Kit (MTK) Touchscreen sensor self-test
Low power CAPSENSE™ wake-up button with power consumption of 50 µA Low power wake-on-touchscreen with power consumption of 120 µA
System performance (configuration dependent) Screen sizes up to 8.5-inch diagonal
6.2-mm electrode pitch; 16:9 aspect ratio Up to 48 sense pins, 560 intersections; 16:9 aspect ratio (28 × 20) Reports up to 10 fingers
Small finger support down to 4 mm Refresh rate up to 250 Hz; other rates configurable TX frequency up to 350 kHz