STM8S Application Specific Line for Low-Power Applications

About STM8S Application Specific Line

The STM8S is available in a variety of packages from 8 to 64 pins to meet the requirements of space-constrained applications. The STM8S offers a wide range of features including timers, a communication interface, high-speed ADC and DAC converters, an internal oscillator up to 16MHz with external clock input, a real-time clock, power management features such as wake-up from deep sleep mode, and brown out reset function when voltage drops below 2.7V.

The STM8S Application-specific line offers superior analog performance with a new high dynamic range ADC. This ADC has a 10-bit resolution with an input voltage range of up to 5 V, supporting sensor applications such as humidity, temperature, and pressure sensors. The ADC is also available without external reference (single supply operation) to allow operation in power-limited devices.

The STM8S Application-specific line also includes two new high-speed DACs with 12-bit resolution, allowing the creation of high-fidelity audio and video systems. These DACs can be used with various modulation schemes such as PWM, Dithering, and Sigma Delta modulation modes to create low noise and distortion audio signals.

STM8S devices offer several analog peripherals such as ADCs, DACs, comparators, timers, PWM channels, and an RTC (real-time clock). Moreover, they can be equipped with additional high-speed SPI or I2C peripherals such as SPIFI™ or LINFlex™ transceiver controllers.

Technology In STM8S Application Specific Line

STM8S is a cost-effective solution for application-specific lines. The STM8S device is an 8-bit microcontroller with on-chip Flash, SRAM, and EEPROM memory. It includes an advanced high-speed mixed signal analog to digital converter (ADC) with 14 channels, 12-bit resolution, up to 200 kS/s sampling rate, and ±12V analog supply voltage range.

The GPIOs are configurable as digital inputs or outputs and can be used to interface external peripherals such as a display, LCD, or LED module. An external interrupt controller allows the system to respond to external events, such as push buttons or temperature sensors. The low power consumption of the device allows it to operate from batteries or energy harvesting sources such as solar cells, making it ideal for remote applications such as wireless sensor nodes and smart meters.

STM8S is a low-cost STM8S microcontroller family. The STM8S includes a set of peripherals for use in both onboard and stand-alone applications. It is pin compatible with the STM8, which makes it easy to migrate from STM8 to STM8S. The STM8S has a 20 MHz internal oscillator and its operating voltage range is from 1.62V to 3.6V. The device has 64 KB flash memory and 16 KB RAM, which are enough for most applications.

The STSM825x is the best choice for embedded applications requiring LCD control and touch panel interface peripheral support. This device can be used as a slave to an external microcontroller or as an embedded controller in standalone applications. STSM825x comes with 128 bytes of RAM and 128 bytes of EEPROM memory as standard features. The device also has 32 KB flash memory that can be used for program storage or user data storage depending on the application’s needs (see Table 1).

STM8S-LOW-POWER Microcontrollers (MCUs)

STM8S-LOW-POWER Microcontrollers (MCUs) are low-power, high-performance, 8-bit microcontrollers with integrated Flash memory, SRAM, an external bus interface, and advanced peripherals. The family consists of a wide range of devices with varying numbers of general-purpose I/O pins (GPIOs), built-in analog features, serial communication interfaces, and other standard peripherals.

The STM8S-LOW-POWER MCUs are produced using the same 0.35 µm CMOS process (high density) as the ARM Cortex M3-based STM32F0 series. This technology provides a high level of integration and low power consumption at very competitive prices. It offers high speed for real-time control applications thanks to its internal 8 MHz RC oscillator, which enables the CPU clock speed up to 80 MHz in active mode (80 MHz @ 3 V).

STMicroelectronics’ STM8S-LOW-POWER MCUs are designed for cost-sensitive applications, such as appliance control and power management. They offer a large Flash memory (up to 64 Kbytes), and an 8-bit RISC CPU with high integration, low power consumption, and low cost. In addition, the devices feature an enhanced integrated analog block that reduces external component count and board space.

STM8S-LOW-POWER MCU Key Features

STM8S-LOW-POWER MCU is a small, low-power, high-performance 8-bit microcontroller family. The STM8S family devices offer the best combination of performance, cost, and power consumption. They are ideally suited for control applications in the industrial and consumer markets.

The main advantage of using an STM8S device over other popular microcontroller chips like the Atmel AVR or Microchip PIC is that it has built-in support for USB communication and CAN bus communication built into its core architecture. This means that if you want to build a device that communicates over USB or CAN bus then you don’t need to add any additional hardware – all of this functionality is already built into the chip itself.

Low-power: Implemented in a 28-pin package, the STM8S offers a very low sleep current (1uA), allowing battery operation for years.

High performance: T It also features on-chip memory and peripheral controllers, making the STM8S ideal for embedded applications.

Easy to use: The STM8S series is compatible with the STMicroelectronics ST7 and ST10 families of microcontrollers, making it easy to migrate from existing designs.

Extensive range: The STM8S08 family is available in 8 or 16 bits and in three different speed grades.”

STM8S Application Specific Line for Low-Power Applications

The STM8S Series is a family of ultra-low power microcontrollers with high performance, low cost, and a small package. The STM8S Series offers the best performance/power ratio in its class, integrating up to 256 KB Flash, 24 MHz CPU speed, and up to 32 GPIOs.

The STM8S Series is designed to meet the needs of today’s applications requiring increased performance and lower power consumption. The STM8S Series offers an extensive range of standard peripheral functions including ADC, DAC, timers, UARTs, and SPI/I²C interfaces.

The STM8S microcontroller is the ideal choice for low-power applications, including battery-powered devices and systems. It offers a high degree of integration and efficiency, together with a wide range of analog and digital peripherals, making it an ideal solution for many applications.

The STM8S is based on the ARM Cortex M3 core. It includes 1MB Flash memory and 128KB RAM, as well as up to 60 GPIO pins. The device’s high level of integration allows for easy design-in of advanced features such as single-wire serial interface (SWI), pulse width modulation (PWM), real-time clock (RTC), and hardware encryption engine (HCE). The low power consumption combined with its high performance makes the device ideal for battery-powered devices or those requiring extended operating times between charges.

Perfect Customized STM8S Application Specific Line Solutions

STM8S Series is one of the most popular families of microcontrollers. STM8S Series combines high performance, low power consumption, and small size to make it a cost-effective solution for many applications including industrial control, consumer electronics, and automotive applications.

The STM8S series has been designed to meet the needs of embedded developers who want to develop their own application-specific line solutions. The STM8S series offers:

An extensive set of peripherals allows you to easily create your own application-specific lines by combining standard products (e.g., LCD Display Controller) with other peripherals such as Ethernet MAC, CAN controller & USB host controller, etc.

Call us for your customized applications and we will help you to design and develop the best solution. We have a wide range of STM8S MCU-based products and modules which are used in various applications such as automotive, industrial, medical, and consumer electronics. Our high-performance devices provide optimal solutions for every requirement of customers.

We provide complete customization of our products to meet client’s specific needs by offering a wide range of options including:

1) Temperature range options (0-70°C or 0-85°C)

2) Voltage options (3.3V or 5V)

3) Number of I/O pins (2 ~ 20) with different pin configurations on different models (e.g., PWM, UART, SPI, Timers, etc.)

4) Memory size options (1K ~ 16K bytes Flash + 512 bytes RAM).

Conclusion

The STM8S series is a family of 8-bit microcontrollers based on the ARM Cortex-M3 CPU core operating at frequencies up to 72 MHz and featuring a 32-bit program memory addressing capability. The STM8S family is designed to offer a high-performance and low-power solution in a small package that fits easily into many applications. The STM8S devices are available in TQFP32, QFN32, and LQFP32 packages. The STM8S product family includes devices with up to 64Kb of flash memory and up to 24 GPIOs.

As a professional STM8S microcontroller supplier, we have been supplying STM8S application-specific line solutions for many years. With our rich experience in this area, we can provide you with high-quality and low-price products.