RF-HDT-DVBE-N2

What is RF-HDT-DVBE-N2?

RF-HDT-DVBE-N2 is a digital video broadcasting over the air (DVB-T2) system developed by Rohde & Schwarz. It is a digital terrestrial television (DTT) system that broadcasts at a frequency of 790 MHz to 862 MHz and uses a modulation scheme called Orthogonal Frequency Division Multiplexing (OFDM). It is ideal for the transmission of high-definition television (HDTV) signals, as it can provide higher quality than traditional analog systems. The system is also designed for robustness and flexibility, so it can be used in a variety of environments. It is used in Europe, Africa, and the Middle East.

RF-HDT-DVBE-N2 provides high-quality digital TV reception, with low signal distortion and low bit error rate (BER). It also features low power consumption, making it suitable for battery-operated devices. The system is equipped with advanced signal processing and error correction techniques, which make it more resistant to interference from other sources. It also supports multiple channels, allowing for greater flexibility in programming.

The RF-HDT-DVBE-N2 system was developed by Rohde & Schwarz to provide an economical solution for broadcasters, as well as consumers. It is particularly useful for broadcasters who wish to transmit their content to multiple geographic areas. The system is also well-suited for use in both urban and rural areas, as it is capable of providing reliable reception in both.

How to use RF-HDT-DVBE-N2?

Using RF-HDT-DVBE-N2 is relatively straightforward, as the system is designed for easy setup and use. To begin, broadcasters will need to purchase a compatible receiver. Once the receiver is installed and connected to the network, broadcasters can then configure the settings and frequencies to accommodate their desired channels. The receiver will also need to be connected to the TV, either via an HDMI cable or via a scart cable. Once the connection has been made, the receiver can then be tuned to the desired channels.

In order to receive content via RF-HDT-DVBE-N2, viewers must have an appropriate antenna and receiver that are compatible with the system. The antenna should be installed in a location that is free from obstructions, as this will help to ensure optimal reception. Once the antenna is installed, viewers can then connect the receiver to the TV and tune it to the desired channels.

RF-HDT-DVBE-N2 is an effective and reliable digital video broadcasting system that is capable of providing high-quality HDTV reception. It is suitable for use in both urban and rural areas and is ideal for broadcasters who wish to transmit their content to multiple geographic areas. With its easy setup and use, it is an ideal solution for broadcasters and consumers alike.

Features and Specifications

• Frequency range: 790 MHz to 862 MHz
• Modulation scheme: Orthogonal Frequency Division Multiplexing (OFDM)
• Input power: 1.7 dBm
• Output power: 19 dBm
• Output power per channel: 4.2 dBm
• Channel spacing: 8 MHz
• Modulation: 64QAM, 256QAM
• Error correction: Reed-Solomon
• Error detection: CRC-8
• Reception bandwidth: 6 MHz
• Maximum bit rate: 40 Mbps
• Maximum symbol rate: 8.0 Mbps

Customer Reviews and Scores

RF-HDT-DVBE-N2 has received generally positive reviews from customers. Many have praised its reliable reception and robustness, as well as its wide range of features and low power consumption. Customers have also noted that the system is easy to set up and use.

Overall, customers have given this system an average score of 4.5 out of 5 stars.

Pros and Cons

Pros

• Reliable reception
• Robustness
• Wide range of features
• Low power consumption
• Easy to setup and use

Cons

• Expensive compared to other systems
• Limited channel selection

FAQ

Q: What type of antenna do I need to use with the RF-HDT-DVBE-N2 system?

A: In order to receive content via the RF-HDT-DVBE-N2 system, you will need an appropriate antenna and receiver that are compatible with the system. The antenna should be installed in a location that is free from obstructions, as this will help to ensure optimal reception. 

Q: Does the RF-HDT-DVBE-N2 system support HDTV?

A: Yes, the RF-HDT-DVBE-N2 system is designed for the transmission of high-definition television (HDTV) signals, as it can provide higher quality than traditional analog systems.

Q: Is the system suitable for use in both urban and rural areas?

A: Yes, the system is well-suited for use in both urban and rural areas, as it is capable of providing reliable reception in both.

Conclusion

In conclusion, RF-HDT-DVBE-N2 is a digital video broadcasting system developed by Rohde & Schwarz that is suitable for use in both urban and rural areas. It is capable of providing high-quality HDTV reception, with low signal distortion and low bit error rate (BER). It also features low power consumption and is easy to set up and use. The system is well-suited for broadcasters who wish to transmit their content to multiple geographic areas and is an ideal solution for both broadcasters and consumers alike.